Basement level, staircase: 25 cm thick monolithic reinforced concrete, in some places 15 cm thick formwork
Above ground level: 12 cm thick, Binderholz CLT panels
Internal load-bearing walls:
10-12 cm thick, Binderholz CLT panels
Garage level: 16 cm thick monolithic reinforced concrete
Elevator shaft: 16 cm thick monolithic reinforced concrete
Acoustic profiles (between CLT panels): Rothoblaas Piano, sized based on weight
Non-load-bearing partitions:
10-12 cm thick plasterboard wall, with variable layer structure, with increased acoustic compliance (application of Rigips Blue Acoustic and Tecsound50 sound attenuation)
Basement level partitions: 10 cm thick aerated concrete masonry unit (Ytong)
Prefabricated walls (on one side of CLT panels): Plasterboard prefabricated walls, with variable layer structure
Covering of machinery shafts: 2 layers of fire-resistant plasterboard, with lockable inspection doors, where necessary
End ceiling: 16 cm thick, Binderholz CLT
Indoor stairs:
In apartment B2: Binderholz CLT stairs
In the stairwell: Monolithic reinforced concrete stairs
Outdoor stairs:
Between the stairwell and building B: Concrete stairs manufactured on site
Interior surface preparation (gypsum board surfaces): 2 layers of putty, 3 layers of white painting (Biokay, chemical-free materials)
Warm coverings (living rooms, rooms): Wooden parquet, with an edge of the same material
Cold coverings:
Floor coverings (except living rooms, rooms): Glued tiles (60x60 cm), with an edge of the same material
Wall coverings (bathrooms, w.c.): Glued tiles (30x60 cm), up to 2.10 m height, up to the door edges, equipped with aluminum edge protection on the positive edges
In the staircase: Glued tiles (60x60 cm), with an edge of the same material
In the garage: Industrial-quality, non-slip, glued floor tiles
Cladding exchangers: Aluminum profile
Waterproofing:
Under and next to bathtubs and shower trays: Greased waterproofing, with corner reinforcement tape
For walls below ground level, floors on the ground: Insulation against soil moisture, glued with flame melting, in 2 layers
On upper floor terraces: Two-layer modified bitumen sheet waterproofing, above the layer providing the slope
On ground-level terraces, green roofs: Root-resistant insulation, in 2 layers (1: cold self-adhesive elastomeric bitumen sheet, 2: elastomeric bitumen weldable sheet, FLL with root resistance)
Surface leakage:
To protect the base insulation: Drain sheet installation
On terraces: Installation of a top leakage sheet, as a water retention layer
Internal substrate: Cement screed suitable for underfloor heating, minimum 60 mm in thickness, with mechanical mixing, with a maximum of 4 mm grain size additive
Adhesion bridge for substrates (under outdoor screed): Cement adhesion bridge, formed on a slope
Rainwater treatment: Precipitation collected from the roof and gutters is collected in a rainwater tank located below ground level at the lowest point of the plot, and the water generated at ground level is also drained into the rainwater collector
Thermal insulation of the final ceiling:
On CLT roof panels: 20 cm thick rock wool
On reinforced concrete ceilings, below residential floors: 15 cm thick rock wool glued and doweled
On reinforced concrete ceilings, on terraces: 20 cm thick, closed-cell polystyrene foam, from above
Thermal insulation of crowns:
On reinforced concrete ceilings: 14 cm extruded PS foam
For CLT panels: 15 cm thick facade rock wool insulation
Baseboard thermal insulation: 14 cm extruded PS foam
Interior doors: Retrofitted doors, adjustable, with wooden frame, full door leaf, painted surface, stainless steel handle, plain or w.c. lock
Facade windows: 77 mm profile thickness, Hofstadter Woodstyle Zero, wood-aluminum, longitudinally extended, laminated design, with 3-layer glazing, outside (7004-FS) aluminum color, inside (RAL 9016) white color, with striking wood grain. For lift-sliding doors, an internal covering element is made in the same natural wood design
Cornices: 2 cm thick limestone cornice
Roofing: Concrete roof tiles (platinum color)
Roof insulation: Vapour-permeable foil, glued at joints
Tin structures: Coated aluminum sheet, light gray (RAL 7005)
Line waterproofing (from the terraces’ covering plane): Patinated zinc sheet, fixed to rails
Rainwater drainage (ground floor terraces): Line gutters, with galvanized steel grating, connected to the rainwater system
Staircase: Aluminum handrail on the inside, gray, 90 cm height
Around balconies and terraces: Closed section (50x30x4 cm) in frame, vertical, stone steel inserts (Ø: 6 mm), fixed every 110 mm, with sintered surface
Fence (towards public area): Natural stone plinth and frame elements, sintered, framed, steel structure, with rod inserts
Passenger and car gates: Sintered, framed, steel structure, with rod inserts, remote-controlled, motorized opening
Cooling and heating:
Mitsubishi City Multi PUHZ heat pump outdoor units, per apartment
Mitsubishi MSZ-LN25VGV and SLZ-M50FA indoor units in living areas, recessed in the ceiling or placed above doors
120 W/m² electric floor heating in kitchens and bathrooms
Electric towel dryer in bathroom
Water heating (central house): Mitsubishi City Multi PUHZ HMV heating heat pump, with 1000 liter tank, with individual measurement
Ventilation: Apartment central, Fisher ERVXQ. Extraction and supply per room. Virus, bacteria and allergen filtration, moisture treatment
Building automation (smart home): Loxone Smart Home, with extended functions: lighting switching, directional and mood lights, audio, cooling-heating, shading, alarm, entry, car charging. Can be expanded as needed
Solar panel preparation: Per apartment, led to the roof of the building
Car chargers: 1 pc. per apartment. Loxone, connected to the apartment's own network, on the wall behind the garage
Sanitary ware:
Bathtub: H2O Mona
Shower tray: H2O Nero
Washbasin, w.c., bidet: Roca Debba
Faucets: Hansgrohe
Electrical fittings: According to plan
Mechanical outlets: According to plan
VölgyGarden
Márvány Group Kft.
Budapest - 1025
Battai út 3/a.
Office: +36 1 200 1429